CaoLiao QR Code

Appearance

Wheeled Dry Powder Fire Extinguisher Inspection ​

Complies with national and industry standards including GB50444-2008, GB4351-2023, GA95-2015, etc. Ready to use for daily inspection of wheeled dry powder fire extinguishers without modifications. Inspection records are permanently stored and can be exported in paper format.

Basic Information ​

Case Label Image ​

Instructions ​

1. Applicable Scenarios and Industries ​

  • Applicable Industries: Properties, shopping malls, office buildings, factories, parks, and various public places requiring fire extinguisher configuration.
  • Reference Standards: GB50444-2008 "Code for Acceptance and Inspection of Building Fire Extinguisher Configuration," GB55036-2022 "General Code for Fire Protection Facilities," GA95-2015 "Maintenance of Fire Extinguishers"

2. Inspection Frequency ​

According to GB50444-2008 "Code for Acceptance and Inspection of Building Fire Extinguisher Configuration," the recommended fire extinguisher inspection frequency is:

  1. General locations should be inspected monthly;
  2. Fire extinguishers configured in the following locations should be inspected semi-monthly:
    • Public places with high population density such as waiting rooms (for buses, planes, ships), entertainment venues (karaoke, etc.);
    • Sites such as storage yards, tank farms, petrochemical plant areas, gas stations, boiler rooms, and basements.

3. Fire Extinguisher Maintenance and Repair ​

According to GB55036-2022 "General Code for Fire Protection Facilities," fire extinguisher users must perform regular inspections on in-service fire extinguishers as stipulated in GB50444-2008 "Code for Acceptance and Inspection of Building Fire Extinguisher Configuration." Fire extinguishers found to meet maintenance requirements should be promptly sent to the manufacturer's maintenance department or its authorized maintenance agency for repair.

Note: According to GB55036-2022 "General Code for Fire Protection Facilities," Article 5.3.2 of GB50444-2008 regarding the maintenance period for fire extinguishers has been abolished. Fire extinguishers no longer require annual inspection and only need to be scrapped according to requirements.

4. Fire Extinguisher Disposal ​

Compiled and merged based on GB55036-2022 "General Code for Fire Protection Facilities" and GA95-2015 "Maintenance of Fire Extinguishers," fire extinguishers meeting any of the following conditions should be scrapped:

After a fire extinguisher is scrapped, it should be replaced following the principle of equivalent substitution.

5. Usage Process ​

5.1 Basic Process ​

The basic process for using QR codes to complete fire equipment inspection consists of 4 steps. Follow these steps to complete the simple setup and usage of a fire equipment inspection system. You can start your setup by following the setup tutorial: View Setup Tutorial

5.2 Advanced Usage ​

The following are advanced features available after mastering the basic process, which can be configured as needed.

Frequently Asked Questions ​

1. How to determine the inspection frequency?

Answer: General locations once per month; densely populated places/special areas semi-monthly. Refer specifically to Article 5.1.2 of GB50444-2008.

2. How to handle abnormal fire extinguishers?

Answer: Mark the abnormal status via the QR code. They need to be sent for repair or scrapped according to GB55036-2022.

3. How long are historical records kept?

Answer: Data is permanently stored, supports filtering and export by time, meeting fire safety regulation requirements.

4. Are there inspection templates for other fire equipment?

For more types of fire equipment, please visit the Fire Safety category in the template library.